ATMEGA645V-8MUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Additional Feature | ALSO OPERATES AT 1.8 V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA645 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | SPI, UART/USART, USI |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| EEPROM Size | 2K x 8 |
| Number of Programmable I/O | 54 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
ATMEGA645V-8MUR Overview
A space-saving advantage is that it is included in the 64-VFQFN Exposed Pad package. Surface Mount is used for mounting. It comes in the package?of a Tape & Reel (TR). The device runs in AVR core processor. The temperature should be kept at -40°C~85°C TA while working. FLASH is the type of program memory used by it. There are 53 I/Os on it, which makes it a very simple device. To find comparable components, use the ATMEGA645 base part number. The terminals of this device are located at QUAD. 64 terminationals are present. There are a number of electrical components in the AVR? ATmega series, including this one. By using a 3V voltage supply, high efficiency is possible. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. A number of 64 pins are used to construct it. The method of Surface Mount is used to mount it. In Microcontrollers, this component is included. Data and programs may be stored on the devices which have a memory size of 64kB. It is powered by a 2/5V?source. It is highly efficient when it works at a frequency of 8MHz. It appears that there are 3 timers/counters in use. There are 54 programmable I/Os. There is also the property of ALSO OPERATES AT 1.8 V MINIMUM SUPPLY AT 4 MHZ associated with it. Vsup should be kept above 2.7V for normal operation. An oscillator of type Internal is used.
ATMEGA645V-8MUR Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA645V-8MUR Applications
There are a lot of Microchip Technology ATMEGA645V-8MUR Microcontroller applications.
- Hand-held metering systems
- Volt meter
- Air fryers
- Ipod
- Automatic control
- Microwave ovens
- Electromechanical control
- Coffee machines
- Computed Tomography (CT scan)
- Industrial robot
