ATMEGA649-16MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2007 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Additional Feature | ALSO OPERATES AT 2.7V SUPPLY AT 8 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 16MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA649 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | SPI, UART/USART, USI |
| Supply Current-Max | 12mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Access Time | 16 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| EEPROM Size | 2K x 8 |
| Number of Programmable I/O | 54 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA649-16MU Overview
To save space, it is included in the 64-VFQFN Exposed Pad package. Surface Mount is the way to mount it. In the package Tray, it is included. A AVR core processor powers the device. During work, the temperature should remain at -40°C~85°C TA. The type of memory it uses is FLASH. There are 53 I/Os on the board. A comparable component can be found by using the base part number ATMEGA649. At QUAD, it has its terminals. As far as terminations are concerned, there are 64 terminations present. This electrical component is part of the AVR? ATmega series. As a result of the 5V supply voltage, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. For its construction, 64 pins are used. Based on the Surface Mount method, it is mounted. The component is included in Microcontrollers. In the device, there is a memory capacity of 64kB which may be used to store programs and data. There is a maximum current supply of 12mA. Power is provided by a 2/5V source. It performs extremely well at a frequency of 16MHz. There are currently 3 timers/counters set up on the system. A chip with 54 programmable inputs/outputs is available. There is also the property of ALSO OPERATES AT 2.7V SUPPLY AT 8 MHZ. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. The oscillator type Internal is used to operate the device.
ATMEGA649-16MU Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA649-16MU Applications
There are a lot of Microchip Technology ATMEGA649-16MU Microcontroller applications.
- Accu-check
- X-ray
- Fire alarms
- Ipod
- Switches
- Virtual reality VR robots
- Fire detection & safety devices
- Food and beverage
- Broadband technology, video and voice processing
- Equipment control
