ATMEGA64C1-15AD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~150°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Automotive, AEC-Q100, AVR® ATmega |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 16MHz |
| Base Part Number | ATMEGA64C1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | CAN, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | CANbus, LINbus, SPI, UART/USART |
| Supply Current-Max | 30mA |
| Bit Size | 8 |
| Data Converter | A/D 11x10b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| ROM (words) | 65536 |
| EEPROM Size | 2K x 8 |
| ROM Programmability | EEPROM |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
ATMEGA64C1-15AD Overview
Due to the benefits of saving space, it is available in the 32-TQFP package. Mounted using Surface Mount. You can find it in the package of Tape & Reel (TR). AVR core processor is present on the device. Work should be performed at a temperature of -40°C~150°C TA. There is FLASH program memory in it. It has a base part number of ATMEGA64C1 that can be used to find other components that are comparable. At QUAD, its terminals are located. A 32 termination is contained within it. Part of the Automotive, AEC-Q100, AVR? ATmega series, this electrical component is used in a variety of applications. Because of the 5V voltage of the supply, high efficiency can be achieved. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. 32 pins are used to construct it. The mounting of this device is carried out following the method of Surface Mount. It is one of the components included in Microcontrollers. Data and programs may be stored on the devices which have a memory size of 64kB. Supply current cannot exceed 30mA. Powered by a 5V source. It is highly efficient when it works at a frequency of 16MHz. In order to fully utilize its adaptability, designers can utilize the supply voltage of 5V in their designs. An oscillator type Internal is required for it to work.
ATMEGA64C1-15AD Features
32-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA64C1-15AD Applications
There are a lot of Microchip Technology ATMEGA64C1-15AD Microcontroller applications.
- Entertainment-radios, CD players, televisions
- Dialysis machines (performs function of liver)
- Leakage current tester
- Coffee machines
- Heart rate monitors
- Volt meter
- Tape drives
- Communication-bluetooth, Wi-Fi, radio
- Home appliances
- Smart highways (navigation, traffic control, information monitoring and car service)
