ATMEGA64C1-15AZ
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 16MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA64C1 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | CAN, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 27 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | CANbus, LINbus, SPI, UART/USART |
| Supply Current-Max | 30mA |
| Bit Size | 8 |
| Data Converter | A/D 11x10b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 2 |
| EEPROM Size | 2K x 8 |
| Number of Programmable I/O | 27 |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Series | Automotive, AEC-Q100, AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
ATMEGA64C1-15AZ Overview
There is a 32-TQFP package available to save space. Surface Mount is the way to mount it. Tape & Reel (TR) is the package that contains it. With a processor of AVR cores, the device is powered. Working at -40°C~125°C TA temperature is recommended. FLASH has been assigned to it as a program memory. 27 I/Os have been provided by the device. A comparable component can be found by using the base part number ATMEGA64C1. This device has terminals at QUAD. There are a total of 32 terminations in it. The electrical component is part of the series Automotive, AEC-Q100, AVR? ATmega. As a result of the 5V supply voltage, high efficiency is possible. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. For its construction, 32 pins are used. The method of Surface Mount is used to mount it. In the subcategory of Microcontrollers, this component is included. Memory size for the devices is 64kB, which can be used to store programs and data. Supply current is maximum at 30mA. It is powered by a 3/5V?source. This device works well at 16MHz frequency when it is operating at a high rate of efficiency. In total, there are 2 timers and counters. There are 27 programmable input/output ports on the chip. Vsup should be kept above 4.5V for normal operation. Internal is the oscillator type it uses.
ATMEGA64C1-15AZ Features
32-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA64C1-15AZ Applications
There are a lot of Microchip Technology ATMEGA64C1-15AZ Microcontroller applications.
- Auto-breaking system
- Aerospace navigation systems
- PDAs, game consoles
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Heater/Fan
- Safety -airbags, automatic braking system (ABS)
- Virtual reality VR robots
- Medical instruments chromatographs
- Oil and gas
- Industrial instrumentation devices
