ATMEGA64L-8AI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.8mm |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Temperature Grade | INDUSTRIAL |
| Interface | 2-Wire, I2C, SPI, UART, USART |
| Max Supply Voltage | 5.8V |
| Min Supply Voltage | 2.7V |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| RAM Size | 4kB |
| Memory Type | FLASH |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Bit Size | 8 |
| Frequency (Max) | 8MHz |
| Access Time | 8 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| Address Bus Width | 16 |
| ROM (words) | 32768 |
| Core Architecture | AVR |
| Number of Programmable I/O | 53 |
| Height Seated (Max) | 1.2mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ATMEGA64L-8AI Overview
The embedded microprocessor has been packed in TQFP for convenient overseas shipping. uPs/uCs/Peripheral ICs are a MICROCONTROLLER, RISC. Total terminations are 64. The microprocessor should be turned on and run with a voltage supply of 3V volts. There is a 8-Bit architecture in it. There is 8MHz frequency set for the CPU. You can find information about the functions of 64 pins in the datasheets. An example of a Microcontrollers microprocessor can be found here. For data transfer, there is 8b bandwidth available. It is recommended that the CPU microprocessor is not operated in an environment with a temperature of more than 85°C. The CPU microprocessor body is injected with 64 pins. With the Surface Mount mounted, this CPU is widely used in a wide range of applications. CPU frequency should reach 8MHz. From 5.5V onwards, the CPU microprocessor can operate. This CPU microprocessor requires 3/5V power supplies according to the datasheet. There is 4kB RAM (Random Access Memory). normally, the microprocessor should not receive a voltage higher than 5.8V. In order for the micro processor to work at its best, it should be fed a voltage of 2.7V. Programs on the CPU transfer data through 53 I/Os. A CPU is equipped with a 64kB sized memory. An indication of CPU load is provided by 4 counters. This computer has Brown-out Detect/Reset, POR, PWM, WDT peripherals attached to the CPU microprocessor. This embedded microprocessor has 53 programmable I/Os for data transfer.
ATMEGA64L-8AI Features
8-Bit Structure
8b-Bit Data Bus Width
4kB RAM
53 I/Os
Brown-out Detect/Reset, POR, PWM, WDT Peripherals
ATMEGA64L-8AI Applications
There are a lot of Atmel (Microchip Technology) ATMEGA64L-8AI Microprocessor applications.
- PDAs, game consoles
- Equipment control
- Telephone sets
- Playstation
- Industrial instrumentation devices
- Fire detection & safety devices
- Office automation equipment and computer peripherals
- Petrochemical
- Measurement and control field
- Digital set-top boxes
