ATMEGA64M1-MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | AVR® ATmega |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 16MHz |
| Base Part Number | ATMEGA64M1 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | CAN, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 27 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | CANbus, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x10b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 2 |
| EEPROM Size | 2K x 8 |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
ATMEGA64M1-MU Overview
For space savings, it is available in the 32-VQFN Exposed Pad package. Surface Mount is used for mounting. It comes in the package?of a Tray. The device runs in AVR core processor. The temperature should be kept at -40°C~85°C TA while working. FLASH has been assigned to it as a program memory. The device has 27 I/Os. It has a part number of ATMEGA64M1 that can be used to locate similar components. At QUAD, its terminals are located. Currently, it consists of 32 terminationals. It is a member of the AVR? ATmega series of electrical components. It is possible to achieve high efficiency with a 5V supply voltage. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. The structure is constructed from 32 pins. Mounting is performed in accordance with Surface Mount. Microcontrollers contains this component. In order to store data and programs, the devices have a memory size of 64kB. There is a source of power of 3/5V that powers this device. This device works well at 16MHz frequency when it is operating at a high rate of efficiency. There are currently 2 timers/counters set up on the system. Normal operation requires a supply voltage (Vsup) above 4.5V. Using a Internal oscillator type, it works well.
ATMEGA64M1-MU Features
32-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA64M1-MU Applications
There are a lot of Microchip Technology ATMEGA64M1-MU Microcontroller applications.
- Sonography (Ultrasound imaging)
- Oil and gas
- Equipment control
- Industrial instrumentation devices
- Robots
- DVD\DV\MP3 players
- Smart instruments
- Instrument control
- Dishwashers
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
