ATMEGA8-16MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Termination | SMD/SMT |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 16MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 16 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Density | 64 kb |
| ROM (words) | 4096 |
| EEPROM Size | 512 x 8 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 3 |
| Number of I2C Channels | 1 |
| Height | 1mm |
| Length | 5.1mm |
| Width | 5.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA8-16MU Overview
For the purpose of saving space, it is available in the 32-VFQFN Exposed Pad package. In this case, it is mounted using the method of Surface Mount. You can find it in the package of Tray. Devices with AVR core processors are available. Work should be performed at a temperature of -40°C~85°C TA. FLASH is the type of program memory used by it. 23 I/Os can be found on it. It has a part number of ATMEGA8 that can be used to locate similar components. QUAD is the location of its terminals. 32 terminations are present in it. There are a number of electrical components in the AVR? ATmega series, including this one. By using a 5V voltage supply, high efficiency is possible. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. For its construction, 32 pins are used. This mount is done in accordance with the method of Surface Mount. It is one of the components included in Microcontrollers. Using the devices' 8kB memory size, you can store programs and data. Power is provided by a source of 5V. The system is highly efficient when working at a frequency of 16MHz. 5V offers full adaptability and voltage supply when it is employed by designers. It works with an oscillator type Internal.
ATMEGA8-16MU Features
32-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA8-16MU Applications
There are a lot of Microchip Technology ATMEGA8-16MU Microcontroller applications.
- Projectors
- Calculator
- Fabric
- Paper shredders
- Smartphone
- Leakage current tester
- DCS control intelligent sensor
- Ipod
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Hand-held metering systems
