ATMEGA8515L-8JUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 6 (Time on Label) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 5 V NOMINAL |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3V |
| Frequency | 4MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA8515 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Interface | EBI/EMI, SPI, UART, USART |
| Memory Size | 1.8kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| Speed | 8 MHz |
| RAM Size | 512 x 8 |
| Memory Type | FLASH, OTP |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | EBI/EMI, SPI, UART/USART |
| Bit Size | 8 |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| Address Bus Width | 16 |
| ROM (words) | 4096 |
| EEPROM Size | 512 x 8 |
| Length | 16.586mm |
| RoHS Status | ROHS3 Compliant |
ATMEGA8515L-8JUR Overview
There is an option to purchase it in the 44-LCC (J-Lead) package, which saves space. This is mounted using the Surface Mount method. In the package Tape & Reel (TR), it is included. The device has a AVR core processor. Work should be done at -40°C~85°C TA. Its type of program memory is FLASH. The device has 35 I/Os. It has a part number of ATMEGA8515 that can be used to locate similar components. At QUAD, its terminals are located. Currently, it consists of 44 terminationals. This electrical component is part of the AVR? ATmega series. This is due to the fact that the supply voltage is 3V, resulting in high efficiency. As far as data storage is concerned, FLASH, OTP is used as the memory type. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. 44 pins are used to construct it. This mount is done in accordance with the method of Surface Mount. It falls under the category of Microcontrollers. In the device, there is a memory capacity of 1.8kB which may be used to store programs and data. There is a source of power of 3/5V that powers this device. Working at a frequency of 4MHz results in excellent efficiency. 2 counters/timers are currently active. The property ALSO OPERATES AT 5 V NOMINAL is also present in it. Internal is the oscillator type it uses.
ATMEGA8515L-8JUR Features
44-LCC (J-Lead) package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA8515L-8JUR Applications
There are a lot of Microchip Technology ATMEGA8515L-8JUR Microcontroller applications.
- Keyboards
- Dialysis machines (performs function of liver)
- Temperature sensing and controlling devices
- Information appliances (networking of household appliances)
- Embedded gateways
- Multi-meter
- Hard drives
- Current meter
- Air fryers
- Equipment control
