ATMEGA8535-16AUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 4MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA8535 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 32 |
| Speed | 16 MHz |
| RAM Size | 512 x 8 |
| Memory Type | FLASH, OTP |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| EEPROM Size | 512 x 8 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
ATMEGA8535-16AUR Overview
To save space, it is included in the 44-TQFP package. This is mounted using the Surface Mount method. Tape & Reel (TR) is the package that contains it. Devices with AVR core processors are available. Work should be performed at a temperature of -40°C~85°C TA. Its type of program memory is FLASH. The device has 32 I/Os. Based on the ATMEGA8535 base part number, it can be compared with other components. QUAD is the location of its terminals. 44 terminationals are present. There are a number of electrical components in the AVR? ATmega series, including this one. By using a 5V voltage supply, high efficiency is possible. For data storage, FLASH, OTP is used as its memory type. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. It is constructed with 44 pins. A method of mounting is used, which is Surface Mount. In the subcategory of Microcontrollers, this component is included. It is possible to store programs and data on the devices, as they have a memory size of 3.5kB. A 5V source of power is being used to run it. At a frequency of 4MHz, it can achieve excellent efficiency. Designers can fully utilize the supply voltage of 5V's adaptability while employing it. There are 3 timers/counters. The oscillator type Internal is used to operate the device.
ATMEGA8535-16AUR Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA8535-16AUR Applications
There are a lot of Microchip Technology ATMEGA8535-16AUR Microcontroller applications.
- Mobile computers
- Smartphone
- Copiers
- Microwave ovens
- Petrochemical
- Gas monitoring systems
- Routers
- Entertainment products
- Ipad
- Hard drives
