ATMEGA88A-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA88A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | 2-Wire, I2C, SPI, Serial, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| EEPROM Size | 512 x 8 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 1 |
| Height | 1.05mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA88A-AU Overview
There is a 32-TQFP package available to save space. A Surface Mount mounting method is used. It is available in the Tray package. Devices with AVR core processors are available. Working at -40°C~85°C TA temperature is recommended. The type of memory it uses is FLASH. The device has 23 I/Os. It has a part number of ATMEGA88A that can be used to locate similar components. The terminals of this device are located at QUAD. As far as terminations are concerned, there are 32 terminations present. There are a number of electrical components in the AVR? ATmega series, including this one. High efficiency is possible due to the 5V supply voltage. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. 32 pins are used to construct it. Based on the Surface Mount method, it is mounted. This component is a part of Microcontrollers. The devices have a memory size of 8kB that can be used to store programs and data. Power is provided by a 2/5V source. This device achieves excellent efficiency at frequencies of 20MHz. It appears that there are 3 timers/counters in use. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. Using an oscillator type Internal, it operates.
ATMEGA88A-AU Features
32-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA88A-AU Applications
There are a lot of Microchip Technology ATMEGA88A-AU Microcontroller applications.
- Microwave ovens
- Digital TVs
- Dialysis machines (performs function of liver)
- Dishwashers
- Ipod
- Wastewater treatment
- Television
- Scanners
- Set-top boxes
- Aerospace navigation systems
