ATMEGA88PA-AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Number of Pins | 28 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2015 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Additional Feature | ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 10 MHZ AND 1.8 V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA88PA |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 512 x 8 |
| On Chip Program ROM Width | 8 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
ATMEGA88PA-AN Overview
There is an option to purchase it in the 32-TQFP package, which saves space. In this case, it is mounted using the method of Surface Mount. There is a Tray package available for it. A AVR core processor powers the device. When working, the temperature should be kept at -40°C~105°C TA. FLASH is the type of program memory used by it. The device has 23 I/Os. In order to find similar components, it has a base part number of ATMEGA88PA. At QUAD, it has its terminals. In this case, there are 32 terminationals. There are a number of electrical components in the AVR? ATmega series, including this one. Using the 5V supply voltage allows for high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. The structure is constructed from 28 pins. It is mounted based on the method of Surface Mount. Microcontrollers contains this component. Memory size for the devices is 8kB, which can be used to store programs and data. Supply current is maximum at 9mA. A 2/5V source of power is being used to run it. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. 3 timers/counters are in use. Moreover, it also has the property of ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 10 MHZ AND 1.8 V MINIMUM SUPPLY AT 4 MHZ. Normal operation requires a supply voltage (Vsup) above 4.5V. Using an oscillator type Internal, it operates.
ATMEGA88PA-AN Features
32-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA88PA-AN Applications
There are a lot of Microchip Technology ATMEGA88PA-AN Microcontroller applications.
- Nintendo
- Tape drives
- Digital set-top boxes
- Computed Tomography (CT scan)
- Pacemakers (used to control abnormal heart rhythm)
- Dryers
- Robotic prosthetic limbs
- Automatic staplers
- Current meter
- Virtual reality VR robots
