ATMEGA88PA-ANR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Additional Feature | ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 10 MHZ AND 1.8 V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA88PA |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 512 x 8 |
| On Chip Program ROM Width | 8 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
ATMEGA88PA-ANR Overview
It is available in the 32-TQFP package for the benefit of saving space. Surface Mount is used for mounting. There is a Tape & Reel (TR) package available for it. Devices with AVR core processors are available. The temperature should be kept at -40°C~105°C TA while working. The type of memory it uses is FLASH. The device has 23 I/Os. A component with the same part number as ATMEGA88PA can be compared to other similar components. At QUAD, its terminals are located. It consists of 32 terminationals. Part of the AVR? ATmega series, this electrical component is used in a variety of applications. By using a 5V voltage supply, high efficiency is possible. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. The structure is composed of 32 pins. According to Surface Mount, it is mounted. In the subcategory of Microcontrollers, this component is included. The devices have a memory size of 8kB that can be used to store programs and data. In this case, 9mA represents the maximum current supply. Powered by a 2/5V source. It is highly efficient when it works at a frequency of 20MHz. There are currently 3 timers/counters set up on the system. It has the property of ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 10 MHZ AND 1.8 V MINIMUM SUPPLY AT 4 MHZ as well. Normal operation requires a supply voltage (Vsup) above 4.5V. An oscillator type Internal is required for it to work.
ATMEGA88PA-ANR Features
32-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA88PA-ANR Applications
There are a lot of Microchip Technology ATMEGA88PA-ANR Microcontroller applications.
- Communication-bluetooth, Wi-Fi, radio
- Fabric
- Heater/Fan
- Scanners
- Smartphones-calling, video calling, texting, email
- PDAs, game consoles
- Robotic prosthetic limbs
- X-ray
- Air fryers
- Smoke alarms
