ATMEGA88PA-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Termination | SMD/SMT |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA88PA |
| Voltage | 5V |
| Interface | I2C, SPI, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Density | 64 kb |
| EEPROM Size | 512 x 8 |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 6 |
| Number of SPI Channels | 2 |
| Height | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA88PA-AU Overview
There is an option to purchase it in the 32-TQFP package, which saves space. A Surface Mount mounting method is used. Tray is the package that contains it. A AVR core processor powers the device. During work, the temperature should remain at -40°C~85°C TA. In terms of its program memory type, it is FLASH. There are 23 I/Os on the board. Other components that are comparable to it have the base part number ATMEGA88PA. The position of the device is QUAD at terminal. As far as terminations are concerned, there are 32 terminations present. An electrical component such as this is included in the series AVR? ATmega. As a result of the 5V supply voltage, high efficiency is possible. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. It is constructed using 32 pins. A method of mounting is used, which is Surface Mount. In the subcategory of Microcontrollers, this component is included. In the device, there is a memory capacity of 8kB which may be used to store programs and data. It is important to note that the maximum supply current is 9mA. The system is highly efficient when working at a frequency of 20MHz. The number of timers and counters is 3. There is an oscillator type Internal used in this circuit.
ATMEGA88PA-AU Features
32-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA88PA-AU Applications
There are a lot of Microchip Technology ATMEGA88PA-AU Microcontroller applications.
- Process control devices
- Tape drives
- Multi-meter
- Oscilloscopes
- Television
- Mobile computers
- Calculators
- Guidance-GPS
- Volt meter
- Removable disks
