ATMEGA88PA-AUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Additional Feature | ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 10 MHZ AND 1.8 V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA88PA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 512 x 8 |
| On Chip Program ROM Width | 8 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATMEGA88PA-AUR Overview
To save space, it is included in the 32-TQFP package. Surface Mount is used for mounting. A package of Tape & Reel (TR) contains it. It is equipped with a AVR core processor. Working at -40°C~85°C TA temperature is recommended. FLASH has been assigned to it as a program memory. 23 I/Os can be found on it. Based on the ATMEGA88PA base part number, it can be compared with other components. At QUAD, it has its terminals. In this case, there are 32 terminationals. An electrical component such as this is included in the series AVR? ATmega. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A number of 32 pins are used to construct it. It is mounted based on the method of Surface Mount. It falls under the category of Microcontrollers. In the device, there is a memory capacity of 8kB which may be used to store programs and data. In this case, 9mA represents the maximum current supply. There is a source of power of 2/5V that powers this device. At a frequency of 20MHz, it can achieve excellent efficiency. It appears that there are 3 timers/counters in use. There is also a property of ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 10 MHZ AND 1.8 V MINIMUM SUPPLY AT 4 MHZ on it. During normal operation, the supply voltage (Vsup) should be kept above 4.5V. It works with an oscillator type Internal.
ATMEGA88PA-AUR Features
32-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA88PA-AUR Applications
There are a lot of Microchip Technology ATMEGA88PA-AUR Microcontroller applications.
- DCS control intelligent sensor
- Petrochemical
- Information appliances (networking of household appliances)
- Sonography (Ultrasound imaging)
- Automatic staplers
- Computer/laptop
- Communication-bluetooth, Wi-Fi, radio
- Guidance-GPS
- Home video and audio
- Fax machines
