ATMEGA88PA-CCUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-UFBGA |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | AVR® ATmega |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Additional Feature | ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 10 MHZ AND 1.8 V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Base Part Number | ATMEGA88PA |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 512 x 8 |
| On Chip Program ROM Width | 8 |
| Height Seated (Max) | 0.6mm |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
ATMEGA88PA-CCUR Overview
As a result, it is available in the 32-UFBGA package. Using Surface Mount, it is mounted. In the package Tape & Reel (TR), it is included. The device has a AVR core processor. It is important to keep the temperature at -40°C~85°C TA while working. Its type of program memory is FLASH. 23 I/Os have been provided by the device. Based on the ATMEGA88PA base part number, it can be compared with other components. BOTTOM is the location of its terminals. 32 terminations are present in it. Part of the AVR? ATmega series, this electrical component is used in a variety of applications. As a result of the 5V supply voltage, high efficiency is possible. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. For its construction, 32 pins are used. The method of Surface Mount is used to mount it. Microcontrollers contains this component. The devices have a memory size of 8kB that can be used to store programs and data. There is a maximum current supply of 9mA. A 2/5V source is used for powering it. This device achieves excellent efficiency at frequencies of 20MHz. 3 timer/counters are present. There is also the property of ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 10 MHZ AND 1.8 V MINIMUM SUPPLY AT 4 MHZ. Normally, the supply voltage (Vsup) should remain above 4.5V. The oscillator type Internal is used to operate the device.
ATMEGA88PA-CCUR Features
32-UFBGA package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA88PA-CCUR Applications
There are a lot of Microchip Technology ATMEGA88PA-CCUR Microcontroller applications.
- Xbox
- Christmas lights
- Microwave ovens
- Dishwashers
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Process control devices
- Food and beverage
- Industrial instrumentation devices
- Ipod
- Removable disks
