ATMEGA88PA-MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA88PA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| EEPROM Size | 512 x 8 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| Number of ADC Channels | 8 |
| Number of Serial I/Os | 1 |
| Number of External Interrupts | 2 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 1 |
| Height | 880μm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA88PA-MU Overview
As a result, it is available in the 32-VFQFN Exposed Pad package. Surface Mount is the way to mount it. Tray is the package that contains it. A AVR core processor powers the device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. Its type of program memory is FLASH. 23 I/Os have been provided by the device. Based on its base part number of ATMEGA88PA, other similarly-sized components can be found. QUAD is the location of its terminals. 32 terminationals are present. The AVR? ATmega series contains this electrical component. Because the supply voltage is 5V, high efficiency can be achieved. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. A total of 32 pins are required to construct this device. During the mounting process, the device is mounted based on the Surface Mount method. The component is included in Microcontrollers. In the device, there is a memory capacity of 8kB which may be used to store programs and data. In this case, 9mA represents the maximum current supply. A 2/5V source is used for powering it. When working at a frequency of 20MHz it is able to achieve excellent efficiency. The number of timers and counters is 3. In order to maintain normal operation, Vsup must be above 4.5V. Internal is the oscillator type it uses.
ATMEGA88PA-MU Features
32-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA88PA-MU Applications
There are a lot of Microchip Technology ATMEGA88PA-MU Microcontroller applications.
- Tape drives
- Computers and laptops-video calling, email, blogging
- Digital set-top boxes
- Information appliances (networking of household appliances)
- Answering machines
- Electronic jamming systems
- Kindle
- Paper shredders
- Multi-meter
- Process control devices
