ATMEGA88PA-MUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA88PA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| EEPROM Size | 512 x 8 |
| On Chip Program ROM Width | 16 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 1024 |
| Number of Serial I/Os | 1 |
| Number of External Interrupts | 2 |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATMEGA88PA-MUR Overview
As a result, it is available in the 32-VFQFN Exposed Pad package. The way of mounting it is Surface Mount. It comes in a Tape & Reel (TR) package. AVR core processor is present on the device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. A total of 23 I/Os are available on this device. To find equivalent components, use its ATMEGA88PA base part number. This device has terminals at QUAD. There are a total of 32 terminations in it. The electrical component is part of the series AVR? ATmega. By using a 5V voltage supply, high efficiency is possible. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. There are 32 pins used in the construction of this device. A method of mounting is used, which is Surface Mount. In the subcategory of Microcontrollers, this component is included. In order to store data and programs, the devices have a memory size of 3.5kB. In this case, 9mA represents the maximum current supply. It is powered by a 2/5V?source. It is highly efficient when it works at a frequency of 20MHz. A total of 3 timers/counters have been set up. During normal operation, the supply voltage (Vsup) should be kept above 4.5V. It works with an oscillator type Internal.
ATMEGA88PA-MUR Features
32-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA88PA-MUR Applications
There are a lot of Microchip Technology ATMEGA88PA-MUR Microcontroller applications.
- Computers and laptops-video calling, email, blogging
- Kindle
- Robotic prosthetic limbs
- Blood pressure monitors
- Instrument control
- Hand-held metering systems
- Process control devices
- Electromechanical control
- Ipod
- Paper shredders
