ATMEGA88PV-10AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA88P |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| EEPROM Size | 512 x 8 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 1.05mm |
| Length | 7.1mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATMEGA88PV-10AU Overview
Due to its space-saving qualities, it is available in the 32-TQFP package. It is mounted using the way of Surface Mount. This item can be found in package Tray. The device has a AVR core processor. It is important to keep the temperature at -40°C~85°C TA while working. Its type of program memory is FLASH. There are 23 I/Os on it, which makes it a very simple device. A component with the same part number as ATMEGA88P can be compared to other similar components. The terminals of this device are set to QUAD. This circuit consists of 32 terminationals. The electrical component is part of the series AVR? ATmega. The 4.5V supply voltage enables high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. For its construction, 32 pins are used. Based on the Surface Mount method, it is mounted. Subcategory Microcontrollers includes this component. In the device, there is a memory capacity of 8kB which may be used to store programs and data. A maximum supply current of 9mA is set. It is highly efficient when it works at a frequency of 10MHz. There are currently 3 timers/counters set up on the system. Using an oscillator type Internal, it operates.
ATMEGA88PV-10AU Features
32-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA88PV-10AU Applications
There are a lot of Microchip Technology ATMEGA88PV-10AU Microcontroller applications.
- Binding machines
- Calculator
- Vacuum cleaners
- Projector
- 3D printers
- Industrial instrumentation devices
- Gas monitoring systems
- Robots
- Medical instruments chromatographs
- Blood pressure monitors
