ATMEGA88V-10AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA88 |
| Voltage | 5V |
| Interface | 2-Wire, I2C, SPI, Serial, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| Speed | 20 MHz |
| RAM Size | 1K x 8 |
| Memory Type | EEPROM, FLASH |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 12mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 10 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Density | 64 kb |
| EEPROM Size | 512 x 8 |
| On Chip Program ROM Width | 16 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 512 |
| Number of ADC Channels | 8 |
| Number of Serial I/Os | 1 |
| Number of External Interrupts | 2 |
| Number of PWM Channels | 6 |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA88V-10AU Overview
It is available in the 32-TQFP package for the benefit of saving space. This is mounted using the Surface Mount method. Tray is the package that contains it. There is a AVR as core processor in this device. When working, the temperature should be kept at -40°C~85°C TA. FLASH is its program memory type. The device has 23 I/Os. To find equivalent components, use its ATMEGA88 base part number. QUAD is the position of its terminals on the board. It consists of 32 terminationals. It is a member of the AVR? ATmega series of electrical components. Because of the 3V voltage of the supply, high efficiency can be achieved. As a storage type for data, EEPROM, FLASH is used. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. It is constructed with 32 pins. As a result, it is mounted in accordance with Surface Mount. It is one of the components included in Microcontrollers. In the device, there is a memory capacity of 8kB which may be used to store programs and data. It should be noted that 12mA represents the maximum supply current. When working at a frequency of 10MHz it is able to achieve excellent efficiency. There are currently 3 timers/counters set up on the system. It works with an oscillator type Internal.
ATMEGA88V-10AU Features
32-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA88V-10AU Applications
There are a lot of Microchip Technology ATMEGA88V-10AU Microcontroller applications.
- Wastewater treatment
- Coffee machines
- Routers
- Air fryers
- Keyboards
- Mice
- Measuring revolving objects
- Instrument control
- Tape drives
- Computed Tomography (CT scan)
