ATSAM3A4CA-CU
| Parameters | |
|---|---|
| Packaging | Tray |
| Published | 2012 |
| Series | SAM3A |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Silver/Copper/Nickel (Sn/Ag/Cu/Ni) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Frequency | 84MHz |
| Base Part Number | ATSAM3A |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, MMC, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 63 |
| RAM Size | 64K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | CANbus, I2C, IrDA, LINbus, MMC, SPI, SSC, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 16x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 1 |
| Address Bus Width | 24 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M3 |
| Number of UART Channels | 4 |
| Number of ADC Channels | 16 |
| Number of DAC Channels | 2 |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-TFBGA |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
ATSAM3A4CA-CU Overview
A space-saving advantage is that it is included in the 100-TFBGA package. A Surface Mount mounting method is used. It comes in the package?of a Tray. The device has a ARM? Cortex?-M3 core processor. Work should be performed at a temperature of -40°C~85°C TA. There is FLASH program memory in it. There are 63 I/Os on the board. Other components that are comparable to it have the base part number ATSAM3A. BOTTOM is the position of its terminals on the board. 100 terminationals are present. SAM3A is the series number of this electrical component. It is possible to achieve high efficiency with a 1.8V supply voltage. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A total of 100 pins are required to construct this device. This is a component included in Microcontrollers. Data and programs can be stored on the devices with a memory size of 256kB. A core architecture of ARM is used. The system is highly efficient when working at a frequency of 84MHz. While employing 3.6V, designers can maximize its supply voltage adaptability. There are 1 timers/counters. It is a member of the CORTEX-M3 family of CPUs. There is an oscillator type Internal used in this circuit.
ATSAM3A4CA-CU Features
100-TFBGA package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAM3A4CA-CU Applications
There are a lot of Microchip Technology ATSAM3A4CA-CU Microcontroller applications.
- Graphic terminals
- Robots
- Calculator
- Washing machine
- Current meter
- Entertainment-radios, CD players, televisions
- Accu-check
- Dialysis machines (performs function of liver)
- Petrochemical
- Playstation
