ATSAM3S2AA-AU
| Parameters | |
|---|---|
| Interface | 2-Wire, I2C, I2S, MMC, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 34 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, MMC, SPI, SSC, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 8x10/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 32b |
| Core Architecture | ARM |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 2 |
| Number of SPI Channels | 1 |
| Height | 1.45mm |
| Length | 7mm |
| Width | 7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | SAM3S |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 64MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATSAM3S2 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
ATSAM3S2AA-AU Overview
For the purpose of saving space, it is available in the 48-LQFP package. Surface Mount is the way to mount it. You can find it in the package of Tray. Device with ARM? Cortex?-M3 core processor issupported. Work should be done at -40°C~85°C TA. There is FLASH program memory in it. The device has 34 I/Os. In order to find similar components, it has a base part number of ATSAM3S2. QUAD is the position of its terminals on the board. It consists of 48 terminationals. SAM3S is the series number of this electrical component. The supply voltage of 1.8V allows for high efficiency. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. A number of 48 pins are used to construct it. The mounting of this device is carried out following the method of Surface Mount. Subcategory Microcontrollers includes this component. The devices have a memory size of 128kB that can be used to store programs and data. ARM is the foundation of its architecture. At a frequency of 64MHz, it exhibits excellent efficiency. In order to fully utilize its adaptability, designers can utilize the supply voltage of 3.3V in their designs. 3 timers/counters are in use. Using a Internal oscillator type, it works well.
ATSAM3S2AA-AU Features
48-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAM3S2AA-AU Applications
There are a lot of Microchip Technology ATSAM3S2AA-AU Microcontroller applications.
- Answering machines
- Fax machines
- DCS control intelligent sensor
- Calculators
- Binding machines
- Missile control
- Fire alarms
- Fax machines
- Fire detection & safety devices
- Mobile computers
