ATSAM3S2BA-MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | SAM3S |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 64MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ATSAM3S2 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 1.95V |
| Interface | 2-Wire, I2C, I2S, MMC, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 47 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, MMC, SPI, SSC, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 10x10/12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| Core Architecture | ARM |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATSAM3S2BA-MU Overview
A space-saving advantage is that it is included in the 64-VFQFN Exposed Pad package. It is mounted using the way of Surface Mount. It comes in the package?of a Tray. With a processor of ARM? Cortex?-M3 cores, the device is powered. Working at -40°C~85°C TA temperature is recommended. FLASH is the type of program memory used by it. 47 I/Os can be found on it. To find comparable components, use the ATSAM3S2 base part number. At QUAD, its terminals are located. 64 terminationals are present. It is a member of the SAM3S series of electrical components. Because the supply voltage is 1.8V, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. The structure is constructed from 64 pins. It is mounted based on the method of Surface Mount. It belongs to the subcategory Microcontrollers. Data and programs can be stored on the devices with a memory size of 128kB. The core architecture of the system is ARM. The system is highly efficient when working at a frequency of 64MHz. Designers can fully utilize the supply voltage of 3.3V's adaptability while employing it. In total, there are 3 timers and counters. There is an oscillator type Internal used in this circuit.
ATSAM3S2BA-MU Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAM3S2BA-MU Applications
There are a lot of Microchip Technology ATSAM3S2BA-MU Microcontroller applications.
- Switches
- Light sensing & controlling devices
- Nintendo
- Calculators
- Tape drives
- Measuring revolving objects
- Torpedo guidance
- Home video and audio
- Glucose monitoring systems (for Type 1 Diabetes)
- Laminators
