ATSAM3S2CA-AU
| Parameters | |
|---|---|
| Packaging | Tray |
| Published | 1997 |
| Series | SAM3S |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 64MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATSAM3S2 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | 2-Wire, EBI/EMI, I2C, I2S, MMC, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 79 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | EBI/EMI, I2C, Memory Card, SPI, SSC, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 15x10/12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| Number of Timers/Counters | 6 |
| Address Bus Width | 32b |
| Core Architecture | ARM |
| CPU Family | CORTEX-M3 |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 2 |
| Number of SPI Channels | 1 |
| Height | 1.45mm |
| Length | 14mm |
| Width | 14mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
ATSAM3S2CA-AU Overview
Due to the benefits of saving space, it is available in the 100-LQFP package. Using Surface Mount, it is mounted. It is available in the Tray package. A ARM? Cortex?-M3 core processor powers the device. During work, the temperature should remain at -40°C~85°C TA. Memory type FLASH is used for program memory. The device has 79 I/Os. To find equivalent components, use its ATSAM3S2 base part number. QUAD is the position of its terminals on the board. This circuit consists of 100 terminationals. Part of the SAM3S series, this electrical component is used in a variety of applications. As a result of the 1.8V supply voltage, high efficiency is possible. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. A total of 100 pins are used in its construction. This mount is done in accordance with the method of Surface Mount. It belongs to the subcategory Microcontrollers. Data and programs may be stored on the devices which have a memory size of 128kB. The core architecture of the system is ARM. It is highly efficient when it works at a frequency of 64MHz. Using 3.3V's adaptability as a supply voltage allows designers to maximize its use. The number of timers and counters is 6. This part is part of the CORTEX-M3 family of CPUs. It works with an oscillator type Internal.
ATSAM3S2CA-AU Features
100-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAM3S2CA-AU Applications
There are a lot of Microchip Technology ATSAM3S2CA-AU Microcontroller applications.
- Smoke alarms
- Toasters
- Hearing aids
- Blood pressure monitors
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Ipod
- Medical instruments chromatographs
- Answering machines
- Projectors
- Electrocardiogram (EKG)
