ATSAM3S2CA-CU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TFBGA |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | SAM3S |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Frequency | 64MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATSAM3S2 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 1.95V |
| Power Supplies | 1.83.3V |
| Interface | 2-Wire, EBI/EMI, I2C, I2S, MMC, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 79 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | EBI/EMI, I2C, Memory Card, SPI, SSC, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 15x10/12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 6 |
| Address Bus Width | 24 |
| ROM (words) | 131072 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M3 |
| Number of ADC Channels | 15 |
| Height Seated (Max) | 1.1mm |
| Length | 9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATSAM3S2CA-CU Overview
There is an option to purchase it in the 100-TFBGA package, which saves space. Mounted using Surface Mount. Tray is the package that contains it. With a processor of ARM? Cortex?-M3 cores, the device is powered. When working, it is recommended that the temperature be kept at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. There are 79 I/Os on it, which makes it a very simple device. Based on the ATSAM3S2 base part number, it can be compared with other components. BOTTOM is the position of its terminals on the board. This circuit consists of 100 terminationals. SAM3S is the series number of this electrical component. It is possible to achieve high efficiency with a 1.8V supply voltage. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. It is constructed with 100 pins. Mounting is performed in accordance with Surface Mount. In Microcontrollers, this component is included. Using the devices' 128kB memory size, you can store programs and data. ARM is its core architecture. Power comes from a source of 1.83.3V. Using a frequency of 64MHz, it is very efficient. 6 timers/counters are in use. This part is part of the CORTEX-M3 family of CPUs. There is an oscillator type Internal used in this circuit.
ATSAM3S2CA-CU Features
100-TFBGA package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAM3S2CA-CU Applications
There are a lot of Microchip Technology ATSAM3S2CA-CU Microcontroller applications.
- Mice
- PDAs, game consoles
- Smart instruments
- Equipment control
- Fax machines
- Electronic jamming systems
- DCS control intelligent sensor
- Robotic prosthetic limbs
- Pacemakers (used to control abnormal heart rhythm)
- 3D printers
