ATSAM3S4AA-AU
| Parameters | |
|---|---|
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 64MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATSAM3S4 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | 2-Wire, I2C, I2S, MMC, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 34 |
| RAM Size | 48K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, MMC, SPI, SSC, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 8x10/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 32b |
| Core Architecture | ARM |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 2 |
| Number of SPI Channels | 1 |
| Height | 1.45mm |
| Length | 7mm |
| Width | 7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | SAM3S |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
ATSAM3S4AA-AU Overview
For the purpose of saving space, it is available in the 48-LQFP package. The way of mounting it is Surface Mount. A package of Tray contains it. There is a ARM? Cortex?-M3 as core processor in this device. It is important to keep the temperature at -40°C~85°C TA while working. FLASH is its program memory type. There are 34 I/Os on it. It has a part number of ATSAM3S4 that can be used to locate similar components. QUAD is the location of its terminals. It has 48 terminationals. The SAM3S series includes this electrical component. Because the supply voltage is 1.8V, high efficiency can be achieved. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. A total of 48 pins are required to construct this device. A method of mounting is used, which is Surface Mount. It falls under the category of Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 256kB. Its core architecture is based on ARM. This device works well at 64MHz frequency when it is operating at a high rate of efficiency. 3.3V provides an adaptable and voltage-independent supply voltage when it is used by designers. 3 timers/counters are in use. Using oscillator type Internal makes it work.
ATSAM3S4AA-AU Features
48-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAM3S4AA-AU Applications
There are a lot of Microchip Technology ATSAM3S4AA-AU Microcontroller applications.
- Answering machines
- Volt meter
- Data acquisition and control
- Refrigerators
- Hard drives
- Mice
- Coffee machines
- Firewalls
- Smart instruments
- Accu-check
