ATSAM3S4AA-MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | SAM3S |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 64MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATSAM3S4 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 1.95V |
| Interface | 2-Wire, I2C, I2S, MMC, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 34 |
| RAM Size | 48K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, MMC, SPI, SSC, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 8x10/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| ROM (words) | 262144 |
| Core Architecture | ARM |
| Number of ADC Channels | 8 |
| Height Seated (Max) | 0.9mm |
| Length | 7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATSAM3S4AA-MU Overview
For space savings, it is available in the 48-VFQFN Exposed Pad package. This is mounted using the Surface Mount method. It is available in the Tray package. A ARM? Cortex?-M3 core processor powers the device. Work should be done at -40°C~85°C TA. FLASH is the type of program memory used by it. It has a number of 34I/Os. In order to find similar components, it has a base part number of ATSAM3S4. This device has terminals at QUAD. Currently, it consists of 48 terminationals. The SAM3S series contains this electrical component. Using the 1.8V supply voltage allows for high efficiency. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. The structure is constructed from 48 pins. It is mounted based on the method of Surface Mount. It falls under the category of Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 256kB. The architecture of its core is ARM. At a frequency of 64MHz, it exhibits excellent efficiency. The supply voltage of 3.3V's adaptability can be fully utilised by designers. There are currently 3 timers/counters set up on the system. An oscillator of type Internal is used.
ATSAM3S4AA-MU Features
48-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAM3S4AA-MU Applications
There are a lot of Microchip Technology ATSAM3S4AA-MU Microcontroller applications.
- Automatic staplers
- Process control devices
- Answering machines
- Magnetic resonance imaging (MRI)
- Entertainment-radios, CD players, televisions
- Temperature sensing and controlling devices
- Dryers
- Home video and audio
- Digital TVs
- Oscilloscopes
