ATSAM3S4BA-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | SAM3S |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 64MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATSAM3S4 |
| Operating Supply Voltage | 3.3V |
| Interface | 2-Wire, I2C, I2S, MMC, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 47 |
| RAM Size | 48K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, MMC, SPI, SSC, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 10x10/12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 32b |
| Core Architecture | ARM |
| Number of ADC Channels | 10 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 2 |
| Number of SPI Channels | 1 |
| Height | 1.45mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATSAM3S4BA-AU Overview
Due to its space-saving qualities, it is available in the 64-LQFP package. A Surface Mount mounting method is used. It is available in the Tray package. A ARM? Cortex?-M3 core processor powers the device. The temperature should be kept at -40°C~85°C TA while working. Memory type FLASH is used for program memory. There are 47 I/Os on it. Based on its base part number of ATSAM3S4, other similarly-sized components can be found. The position of the device is QUAD at terminal. It has 64 terminationals. SAM3S is the series number of this electrical component. Using the 1.8V supply voltage allows for high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. It is constructed using 64 pins. The mounting of this device is carried out following the method of Surface Mount. Subcategory Microcontrollers includes this component. Data and programs may be stored on the devices which have a memory size of 256kB. In terms of architecture, it is based on ARM. It is highly efficient when it works at a frequency of 64MHz. Designers can fully utilize the supply voltage of 3.3V's adaptability while employing it. 3 timers/counters are in use. Using oscillator type Internal makes it work.
ATSAM3S4BA-AU Features
64-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAM3S4BA-AU Applications
There are a lot of Microchip Technology ATSAM3S4BA-AU Microcontroller applications.
- Gas monitoring systems
- Routers
- Blenders
- Information appliances (networking of household appliances)
- Removable disks
- Coffee machines
- Dialysis machines (performs function of liver)
- Home appliances
- Sonography (Ultrasound imaging)
- Leakage current tester
