ATSAM3S4CA-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | SAM3S |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 64MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATSAM3S4 |
| Operating Supply Voltage | 3.3V |
| Interface | 2-Wire, EBI/EMI, I2C, I2S, MMC, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 79 |
| RAM Size | 48K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | EBI/EMI, I2C, Memory Card, SPI, SSC, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 15x10/12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| Number of Timers/Counters | 6 |
| Address Bus Width | 32b |
| Density | 2 Mb |
| Core Architecture | ARM |
| CPU Family | CORTEX-M3 |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 2 |
| Number of SPI Channels | 1 |
| Height | 1.45mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATSAM3S4CA-AU Overview
To save space, it is included in the 100-LQFP package. Mounted using Surface Mount. A package of Tray contains it. The device has a ARM? Cortex?-M3 core processor. It is important to keep the temperature at -40°C~85°C TA while working. There is FLASH program memory in it. 79 I/Os can be found on it. In order to find similar components, it has a base part number of ATSAM3S4. At QUAD, its terminals are located. It consists of 100 terminationals. The SAM3S series contains this electrical component. By using a 1.8V voltage supply, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. For its construction, 100 pins are used. According to Surface Mount, it is mounted. The component is included in Microcontrollers. Data and programs may be stored on the devices which have a memory size of 256kB. Its core architecture is ARM. This device achieves excellent efficiency at frequencies of 64MHz. 3.3V offers full adaptability and voltage supply when it is employed by designers. There are 6 timers/counters. It is a member of the CORTEX-M3 family of CPUs. Using an oscillator type Internal, it operates.
ATSAM3S4CA-AU Features
100-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAM3S4CA-AU Applications
There are a lot of Microchip Technology ATSAM3S4CA-AU Microcontroller applications.
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Data acquisition and control
- Vacuum cleaners
- Broadband technology, video and voice processing
- Heart rate monitors
- Hand-held metering systems
- Switches
- Christmas lights
- Printers
- Sonography (Ultrasound imaging)
