ATSAM3S4CA-CU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TFBGA |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | SAM3S |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Frequency | 64MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATSAM3S4 |
| Operating Supply Voltage | 1.8V |
| Supply Voltage-Max (Vsup) | 1.95V |
| Power Supplies | 1.83.3V |
| Interface | EBI/EMI, I2C, I2S, MMC, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 79 |
| RAM Size | 48K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | EBI/EMI, I2C, Memory Card, SPI, SSC, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 15x10/12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 6 |
| Address Bus Width | 24 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M3 |
| Height Seated (Max) | 1.1mm |
| Length | 9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATSAM3S4CA-CU Overview
A space-saving advantage is that it is included in the 100-TFBGA package. Using Surface Mount, it is mounted. It comes in a Tray package. The device runs in ARM? Cortex?-M3 core processor. It is important to keep the temperature at -40°C~85°C TA while working. There is FLASH program memory in it. A total of 79 I/Os are available on this device. To find comparable components, use the ATSAM3S4 base part number. A BOTTOM position is assigned to its terminals. 100 terminations are present in it. It is a member of the SAM3S series of electrical components. High efficiency is possible due to the 1.8V supply voltage. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. A number of 100 pins are used to construct it. As a result, it is mounted in accordance with Surface Mount. In Microcontrollers, this component is included. The devices have a memory size of 256kB that can be used to store programs and data. Its core architecture is based on ARM. There is 1.83.3V power source in this device. When working at a frequency of 64MHz it is able to achieve excellent efficiency. 1.8V offers full adaptability and voltage supply when it is employed by designers. 6 counters/timers are currently active. It belongs to the CORTEX-M3 CPU family. It works with an oscillator type Internal.
ATSAM3S4CA-CU Features
100-TFBGA package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAM3S4CA-CU Applications
There are a lot of Microchip Technology ATSAM3S4CA-CU Microcontroller applications.
- Light sensing & controlling devices
- Industrial instrumentation devices
- Oil and gas
- Equipment control
- Copiers
- Process control devices
- Blenders
- Teletext terminals
- Fire alarms
- Robotic prosthetic limbs
