ATSAM3U2CA-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | SAM3U |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 96MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATSAM3U |
| Interface | EBI/EMI, I2C, MMC, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 57 |
| RAM Size | 36K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | EBI/EMI, I2C, Memory Card, SPI, SSC, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 4x10b, 4x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 32b |
| Core Architecture | ARM |
| Number of ADC Channels | 4 |
| Number of PWM Channels | 7 |
| Number of I2C Channels | 1 |
| Height | 1.45mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATSAM3U2CA-AU Overview
For the purpose of saving space, it is available in the 100-LQFP package. A Surface Mount mounting method is used. Tray is the package that contains it. The device runs in ARM? Cortex?-M3 core processor. Maintain a temperature of -40°C~85°C TA while working. The type of memory in which this program is stored is FLASH. The device has 57 I/Os. It has a part number of ATSAM3U that can be used to locate similar components. The terminals of this device are located at QUAD. It has 100 terminationals. Part of the SAM3U series, this electrical component is used in a variety of applications. Because the supply voltage is 1.8V, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A total of 100 pins are required to construct this device. The method of Surface Mount is used to mount it. This component is a part of Microcontrollers. Data and programs can be stored on the devices with a memory size of 128kB. Its core architecture is ARM. This device works well at 96MHz frequency when it is operating at a high rate of efficiency. 3 timers/counters are in use. Using an oscillator type Internal, it operates.
ATSAM3U2CA-AU Features
100-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAM3U2CA-AU Applications
There are a lot of Microchip Technology ATSAM3U2CA-AU Microcontroller applications.
- Torpedo guidance
- Teletext terminals
- Switches
- Leakage current tester
- Entertainment-radios, CD players, televisions
- Fabric
- Calculator
- Walkie talkies
- Calculators
- Monitoring-temperature level, oil level, speed, distance, acceleration
