ATSAM3X4EA-CU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LFBGA |
| Number of Pins | 144 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2012 |
| Series | SAM3X |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| Terminal Finish | Tin/Silver/Copper/Nickel (Sn/Ag/Cu/Ni) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Frequency | 84MHz |
| Base Part Number | ATSAM3X |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 1.95V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | CAN, EBI/EMI, Ethernet, I2C, IrDA, LIN, MMC, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 103 |
| RAM Size | 68K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | CANbus, EBI/EMI, Ethernet, I2C, IrDA, LINbus, Memory Card, SPI, SSC, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 16x12b; D/A 2x12b |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Address Bus Width | 24 |
| Core Architecture | ARM |
| Number of ADC Channels | 16 |
| Height Seated (Max) | 1.4mm |
| Length | 10mm |
| RoHS Status | ROHS3 Compliant |
ATSAM3X4EA-CU Overview
To save space, it is included in the 144-LFBGA package. Surface Mount is used for mounting. It comes in a Tray package. With a processor of ARM? Cortex?-M3 cores, the device is powered. When working, the temperature should be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. The device has 103 I/Os. Based on its base part number of ATSAM3X, other similarly-sized components can be found. BOTTOM is the position of its terminals on the board. This circuit consists of 144 terminationals. The SAM3X series includes this electrical component. Using the 1.8V supply voltage allows for high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. There are 144 pins used in the construction of this device. According to Surface Mount, it is mounted. The component is included in Microcontrollers. The devices have a memory size of 256kB that can be used to store programs and data. The core architecture of the system is ARM. When working at a frequency of 84MHz it is able to achieve excellent efficiency. 3 counters/timers are currently active. Vsup should be kept above 1.62V for normal operation. There is an oscillator type Internal used in this circuit.
ATSAM3X4EA-CU Features
144-LFBGA package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAM3X4EA-CU Applications
There are a lot of Microchip Technology ATSAM3X4EA-CU Microcontroller applications.
- Electromechanical control
- Laminators
- Magnetic resonance imaging (MRI)
- Heart rate monitors
- DCS control intelligent sensor
- Calculator
- Food and beverage
- Graphic terminals
- Entertainment-radios, CD players, televisions
- Petrochemical
