ATSAM3X8EA-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Surface Mount | YES |
| Number of Pins | 144 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2012 |
| Series | SAM3X |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 1.8V |
| Frequency | 84MHz |
| Base Part Number | ATSAM3X |
| Operating Supply Voltage | 3.6V |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 103 |
| RAM Size | 100K x 8 |
| Memory Type | FLASH, ROM |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 512KB 512K x 8 |
| Connectivity | CANbus, EBI/EMI, Ethernet, I2C, IrDA, LINbus, Memory Card, SPI, SSC, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 16x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| Number of Timers/Counters | 1 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M3 |
| Number of UART Channels | 5 |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 8 |
| Number of DAC Channels | 2 |
| Height | 1.3mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATSAM3X8EA-AU Overview
It is available in the 144-LQFP package for the benefit of saving space. In this case, it is mounted using the method of Surface Mount. This item can be found in package Tray. The device runs in ARM? Cortex?-M3 core processor. When working, it is recommended that the temperature be kept at -40°C~85°C TA. The type of memory it uses is FLASH. There are 103 I/Os on the board. It has a part number of ATSAM3X that can be used to locate similar components. At QUAD, it has its terminals. 144 terminations are present in it. Part of the SAM3X series, this electrical component is used in a variety of applications. Because the supply voltage is 1.8V, high efficiency can be achieved. As far as data storage is concerned, FLASH, ROM is used as the memory type. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A number of 144 pins are used to construct it. It is one of the components included in Microcontrollers. The devices have a memory size of 512kB that can be used to store programs and data. Its core architecture is ARM. This device achieves excellent efficiency at frequencies of 84MHz. The supply voltage of 3.6V's adaptability can be fully utilised by designers. A total of 1 timers/counters are present. It is part of the CORTEX-M3 CPU family. An oscillator type Internal is required for it to work.
ATSAM3X8EA-AU Features
144-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAM3X8EA-AU Applications
There are a lot of Microchip Technology ATSAM3X8EA-AU Microcontroller applications.
- Accu-check
- Fire alarms
- Robots
- Smoke alarms
- Robotic prosthetic limbs
- Microwave ovens
- PDAs, game consoles
- Dishwashers
- Instrument control
- Teletext terminals
