ATSAM4E16CA-AUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | SAM4E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 120MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATSAM4E |
| Qualification Status | Not Qualified |
| Power Supplies | 1.2V |
| Supply Voltage-Min (Vsup) | 1.08V |
| Interface | CAN, Ethernet, I2C, IrDA, MMC, SD, SPI, UART, USART, USB |
| Memory Size | 1MB |
| Oscillator Type | Internal |
| Number of I/O | 79 |
| RAM Size | 128K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M4 |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 1MB 1M x 8 |
| Connectivity | CANbus, Ethernet, IrDA, MMC/SD, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 16x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| Address Bus Width | 24 |
| ROM (words) | 262144 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 32 |
| CPU Family | CORTEX-M4F |
| Low Power Mode | YES |
| On Chip Data RAM Width | 32 |
| Number of DMA Channels | 4 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| RoHS Status | ROHS3 Compliant |
ATSAM4E16CA-AUR Overview
For space savings, it is available in the 100-LQFP package. Mounted using Surface Mount. It comes in a Tape & Reel (TR) package. Device with ARM? Cortex?-M4 core processor issupported. The temperature should be kept at -40°C~85°C TA while working. FLASH is the type of program memory used by it. The device has 79 I/Os. It has a base part number of ATSAM4E that can be used to find other components that are comparable. The position of the device is QUAD at terminal. 100 terminations are present in it. There are a number of electrical components in the SAM4E series, including this one. Using the 1.2V supply voltage allows for high efficiency. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. There are 100 pins used in the construction of this device. It falls under the category of Microcontrollers. Memory size for the devices is 1MB, which can be used to store programs and data. ARM is its core architecture. A 1.2V power source powers it. When working at a frequency of 120MHz it is able to achieve excellent efficiency. 3 counters/timers are currently active. It is one of the members of the CPU family CORTEX-M4F. Normally, the supply voltage (Vsup) should remain above 1.08V. Using a Internal oscillator type, it works well.
ATSAM4E16CA-AUR Features
100-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAM4E16CA-AUR Applications
There are a lot of Microchip Technology ATSAM4E16CA-AUR Microcontroller applications.
- Virtual reality VR robots
- Fax machines
- 3D printers
- ECG machine
- Projector
- Smartphone
- Process control devices
- Pacemakers (used to control abnormal heart rhythm)
- Leakage current tester
- Mice
