ATSAM4E8CA-AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Weight | 1.319103g |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2015 |
| Series | SAM4E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 120MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATSAM4E |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Interface | CAN, Ethernet, I2C, IrDA, MMC, SD, SPI, UART, USART, USB |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 79 |
| RAM Size | 128K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M4 |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 512KB 512K x 8 |
| Connectivity | CANbus, Ethernet, IrDA, MMC/SD, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 16x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Address Bus Width | 24 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 32 |
| CPU Family | CORTEX-M4F |
| Low Power Mode | YES |
| Number of ADC Channels | 12 |
| On Chip Data RAM Width | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATSAM4E8CA-AN Overview
For the purpose of saving space, it is available in the 100-LQFP package. Using Surface Mount, it is mounted. In the package Tray, it is included. The device runs in ARM? Cortex?-M4 core processor. Working at -40°C~105°C TA temperature is recommended. FLASH is its program memory type. There are 79 I/Os on it. It has a part number of ATSAM4E that can be used to locate similar components. At QUAD, its terminals are located. 100 terminations are present in it. The SAM4E series includes this electrical component. As a result of the 1.2V supply voltage, high efficiency is possible. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A number of 100 pins are used to construct it. It falls under the category of Microcontrollers. Using the devices' 512kB memory size, you can store programs and data. Its core architecture is based on ARM. This device works well at 120MHz frequency when it is operating at a high rate of efficiency. 1.2V provides an adaptable and voltage-independent supply voltage when it is used by designers. A total of 3 timers/counters have been set up. CPU family CORTEX-M4F comprises the part. Using an oscillator type of Internal, it works.
ATSAM4E8CA-AN Features
100-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAM4E8CA-AN Applications
There are a lot of Microchip Technology ATSAM4E8CA-AN Microcontroller applications.
- Mobile computers
- Food and beverage
- DDC control
- Electromechanical control
- Glucose monitoring systems (for Type 1 Diabetes)
- Home appliances
- Digital TVs
- Dialysis machines (performs function of liver)
- ECG machine
- Mice
