ATSAM4E8CA-CU
| Parameters | |
|---|---|
| Core Architecture | ARM |
| On Chip Program ROM Width | 32 |
| CPU Family | CORTEX-M4F |
| Low Power Mode | YES |
| On Chip Data RAM Width | 32 |
| Number of DMA Channels | 4 |
| Height Seated (Max) | 1.1mm |
| Length | 9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 100-TFBGA |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | SAM4E |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 120MHz |
| Base Part Number | ATSAM4E |
| Qualification Status | Not Qualified |
| Power Supplies | 1.2V |
| Supply Voltage-Min (Vsup) | 1.08V |
| Interface | CAN, Ethernet, I2C, IrDA, MMC, SD, SPI, UART, USART, USB |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 79 |
| RAM Size | 128K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M4 |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 512KB 512K x 8 |
| Connectivity | CANbus, Ethernet, IrDA, MMC/SD, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 16x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| Address Bus Width | 24 |
ATSAM4E8CA-CU Overview
There is an option to purchase it in the 100-TFBGA package, which saves space. Surface Mount is the way to mount it. In the package Tray, it is included. It is equipped with a ARM? Cortex?-M4 core processor. It is important to keep the temperature at -40°C~85°C TA while working. FLASH has been assigned to it as a program memory. There are 79 I/Os on it, which makes it a very simple device. Other components that are comparable to it have the base part number ATSAM4E. The terminals are positioned at BOTTOM. In this case, there are 100 terminationals. The SAM4E series includes this electrical component. This is due to the fact that the supply voltage is 1.2V, resulting in high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. There are 100 pins used in the construction of this device. Microcontrollers contains this component. Data and programs can be stored on the devices with a memory size of 512kB. ARM is its core architecture. There is 1.2V power source in this device. Using a frequency of 120MHz, it is very efficient. The number of timers and counters is 3. It is a member of the CORTEX-M4F family of CPUs. For normal operation, the supply voltage (Vsup) should be kept above 1.08V. There is an oscillator type Internal used in this circuit.
ATSAM4E8CA-CU Features
100-TFBGA package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAM4E8CA-CU Applications
There are a lot of Microchip Technology ATSAM4E8CA-CU Microcontroller applications.
- Heater/Fan
- Calculators
- Equipment control
- Accu-check
- Virtual reality VR robots
- Medical instruments chromatographs
- Automatic staplers
- Blood pressure monitors
- Calculator
- Guidance-GPS
