ATSAM4S2AA-MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2015 |
| Series | SAM4S |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 120MHz |
| Base Part Number | ATSAM4S2 |
| Supply Voltage-Min (Vsup) | 1.08V |
| Interface | I2C, I2S, IrDA, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 34 |
| RAM Size | 64K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M4 |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, IrDA, Memory Card, SPI, SSC, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 8x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 2 |
| Core Architecture | ARM |
| Height Seated (Max) | 0.9mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
ATSAM4S2AA-MU Overview
For the purpose of saving space, it is available in the 48-VFQFN Exposed Pad package. This is mounted using the Surface Mount method. It comes in a Tray package. Device with ARM? Cortex?-M4 core processor issupported. When working, it is recommended that the temperature be kept at -40°C~85°C TA. Its type of program memory is FLASH. There are 34 I/Os on it. It has a part number of ATSAM4S2 that can be used to locate similar components. The position of the device is QUAD at terminal. This circuit consists of 48 terminationals. Part of the SAM4S series, this electrical component is used in a variety of applications. This is due to the fact that the supply voltage is 1.2V, resulting in high efficiency. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. It is constructed using 48 pins. Based on the Surface Mount method, it is mounted. Data and programs may be stored on the devices which have a memory size of 128kB. Its core architecture is ARM. The system is highly efficient when working at a frequency of 120MHz. A total of 2 timers/counters have been set up. In order to ensure normal operation, the supply voltage (Vsup) must remain above 1.08V. There is an oscillator type Internal used in this circuit.
ATSAM4S2AA-MU Features
48-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATSAM4S2AA-MU Applications
There are a lot of Microchip Technology ATSAM4S2AA-MU Microcontroller applications.
- Routers
- Toasters
- Entertainment-radios, CD players, televisions
- ECG machine
- Keyboards
- Equipment control
- Digital TVs
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Sonography (Ultrasound imaging)
- Computer/laptop
