ATSAM4S4CA-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Weight | 1.319103g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2015 |
| Series | SAM4S |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 120MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATSAM4S4 |
| Operating Supply Voltage | 1.2V |
| Interface | EBI/EMI, I2C, I2S, IrDA, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 79 |
| RAM Size | 64K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M4 |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | EBI/EMI, I2C, IrDA, Memory Card, SPI, SSC, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 16x12b; D/A 2x12b |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 2 |
| Address Bus Width | 24 |
| Core Architecture | ARM |
| Number of ADC Channels | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATSAM4S4CA-AU Overview
For space savings, it is available in the 100-LQFP package. A Surface Mount mounting method is used. In the package Tray, it is included. There is a ARM? Cortex?-M4 as core processor in this device. During work, the temperature should remain at -40°C~85°C TA. FLASH is the type of program memory used by it. A total of 79 I/Os are available on this device. It has a part number of ATSAM4S4 that can be used to locate similar components. The position of the device is QUAD at terminal. A 100 termination is contained within it. This electrical component is part of the SAM4S series. The supply voltage of 1.2V allows for high efficiency. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. A number of 100 pins are used to construct it. Memory size for the devices is 256kB, which can be used to store programs and data. ARM is its core architecture. At a frequency of 120MHz, it exhibits excellent efficiency. 1.2V provides an adaptable and voltage-independent supply voltage when it is used by designers. 2 timers/counters are in use. Internal is the oscillator type it uses.
ATSAM4S4CA-AU Features
100-LQFP package
Mounting type of Surface Mount
ATSAM4S4CA-AU Applications
There are a lot of Microchip Technology ATSAM4S4CA-AU Microcontroller applications.
- Glucose monitoring systems (for Type 1 Diabetes)
- Hard drives
- Digital set-top boxes
- Information appliances (networking of household appliances)
- Data acquisition and control
- Instrument control
- Firewalls
- Keyboards
- Binding machines
- Security systems
