ATSAM4S8BA-MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2012 |
| Series | SAM4S |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 120MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ATSAM4S8 |
| Qualification Status | Not Qualified |
| Interface | I2C, IrDA, MMC, SPI, UART, USART, USB |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 47 |
| RAM Size | 128K x 8 |
| Memory Type | FLASH, ROM |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M4 |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 512KB 512K x 8 |
| Connectivity | I2C, IrDA, Memory Card, SPI, SSC, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 11x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| Core Architecture | ARM |
| Number of UART Channels | 2 |
| Number of ADC Channels | 11 |
| Number of PWM Channels | 4 |
| Number of SPI Channels | 1 |
| Height | 950μm |
| Length | 9mm |
| Width | 9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATSAM4S8BA-MU Overview
To save space, it is included in the 64-VFQFN Exposed Pad package. Mounted using Surface Mount. It is available in the Tray package. A core processor of ARM? Cortex?-M4 is present in the device. The temperature should be kept at -40°C~85°C TA while working. The type of memory it uses is FLASH. There are 47 I/Os on it. Other components that are comparable to it have the base part number ATSAM4S8. QUAD is the location of its terminals. As far as terminations are concerned, there are 64 terminations present. There are a number of electrical components in the SAM4S series, including this one. Using the 1.2V supply voltage allows for high efficiency. FLASH, ROM is its memory type for data storage. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. A total of 64 pins are required to construct this device. It is mounted based on the method of Surface Mount. This component is a part of Microcontrollers. Using the devices' 512kB memory size, you can store programs and data. ARM is its core architecture. The system is highly efficient when working at a frequency of 120MHz. There is an oscillator type Internal used in this circuit.
ATSAM4S8BA-MU Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAM4S8BA-MU Applications
There are a lot of Microchip Technology ATSAM4S8BA-MU Microcontroller applications.
- Auto-breaking system
- Blood pressure monitors
- Paper shredders
- Smartphone
- Scanners
- Missile control
- Instrument control
- Medical instruments chromatographs
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Home appliances
