ATSAMA5D225C-D1M-CU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 196-TFBGA, CSBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SAMA5D2 |
| JESD-609 Code | e2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 196 |
| Terminal Finish | Tin/Silver/Copper/Nickel (Sn/Ag/Cu/Ni) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.75mm |
| Base Part Number | ATSAMA5D225 |
| JESD-30 Code | S-PBGA-B196 |
| Supply Voltage-Max (Vsup) | 1.9V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Speed | 500MHz |
| RAM Size | 128kB |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A5 |
| Clock Frequency | 24MHz |
| Bit Size | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| RAM (words) | 65536 |
| Voltage - I/O | 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI |
| USB | USB 2.0 + HSIC |
| Additional Interfaces | I2C, SMC, SPI, UART, USART, QSPI |
| Number of Serial I/Os | 9 |
| Co-Processors/DSP | Multimedia; NEON™ MPE |
| On Chip Data RAM Width | 16 |
| Security Features | ARM TZ, Boot Security, Cryptography, RTIC, Secure Fusebox, Secure JTAG, Secure Memory, Secure RTC |
| Display & Interface Controllers | Keyboard, LCD, Touchscreen |
| Number of DMA Channels | 51 |
| Height Seated (Max) | 1.2mm |
| Length | 11mm |
| RoHS Status | ROHS3 Compliant |
ATSAMA5D225C-D1M-CU Overview
Since the microprocessor is packed in 196-TFBGA, CSBGA, shipping overseas is convenient. A high level of reliability is provided by using an advanced packaging method Tray. A CPU with 1 Core 32-Bit cores and width 1 Core 32-Bit busses is used. Extended operating temperature around -40°C~85°C TA. A SAMA5D2 series item. The CPU is powered by a ARM? Cortex?-A5 core. There are LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI RAM controllers on this CPU. This microprocessor is equipped with an interface of I2C, SMC, SPI, UART, USART, QSPI. 3.3V is the CPU's I/O address. There is MICROPROCESSOR, RISC MICROPROCESSOR, RISC in the uPs, uCs, or peripheral ICs categories. If you are looking for variants of the cpu microprocessor, try search with ATSAMA5D225. In total, 196 terminations have been made. The microprocessor should be turned on and run with a voltage supply of 1.8V volts. 16-Bit is its architecture. It can supply a maximum current of 1.9V. A clock frequency of 24MHz is used by the CPU microprocessor. There is 128kB RAM (Random Access Memory). Data will be communicated between peripherals through 9 serial I/Os. DMA (Direct Memory Access) is programmed using 51 channels.
ATSAMA5D225C-D1M-CU Features
ARM? Cortex?-A5 Core
16-Bit Structure
128kB RAM
ATSAMA5D225C-D1M-CU Applications
There are a lot of Microchip Technology ATSAMA5D225C-D1M-CU Microprocessor applications.
- Scanners
- Firewalls
- Toys
- Industrial robot
- Traditional industrial transformation
- Light sensing & controlling devices
- Magnetic resonance imaging (MRI)
- Process control devices
- Entertainment-radios, CD players, televisions
- Projectors
