ATSAMA5D225C-D1M-CUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 196-TFBGA, CSBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | SAMA5D2 |
| JESD-609 Code | e2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 196 |
| Terminal Finish | Tin/Silver/Copper/Nickel (Sn/Ag/Cu/Ni) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.75mm |
| Reach Compliance Code | compliant |
| Base Part Number | ATSAMA5D225 |
| JESD-30 Code | S-PBGA-B196 |
| Supply Voltage-Max (Vsup) | 1.9V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Speed | 500MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A5 |
| Clock Frequency | 24MHz |
| Bit Size | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| RAM (words) | 65536 |
| Voltage - I/O | 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI |
| USB | USB 2.0 + HSIC |
| Additional Interfaces | I2C, SMC, SPI, UART, USART, QSPI |
| Number of Serial I/Os | 9 |
| Co-Processors/DSP | Multimedia; NEON™ MPE |
| On Chip Data RAM Width | 16 |
| Security Features | ARM TZ, Boot Security, Cryptography, RTIC, Secure Fusebox, Secure JTAG, Secure Memory, Secure RTC |
| Display & Interface Controllers | Keyboard, LCD, Touchscreen |
| Number of DMA Channels | 51 |
| Height Seated (Max) | 1.2mm |
| Length | 11mm |
| RoHS Status | RoHS Compliant |
ATSAMA5D225C-D1M-CUR Overview
Since the microprocessor is packed in 196-TFBGA, CSBGA, shipping overseas is convenient. Using advanced packaging techniques Tape & Reel (TR), high reliability is ensured. The CPU has 1 Core 32-Bit cores/Bus width. Be aware of the operating temperature around -40°C~85°C TA. The cpu microprocessor belongs to the SAMA5D2 series. The CPU is cored by a processor with a number of 0 cores. A CPU with this architecture uses LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI RAM controllers. This microprocessor is equipped with an interface of I2C, SMC, SPI, UART, USART, QSPI. 3.3V is the I/O speed of this CPU. It is a MICROPROCESSOR, RISC in terms of uPs/uCs/Peripheral ICs. Using ATSAMA5D225 will help you find variants of the cpu microprocessor. Overall, there are 196 terminations. The microprocessor should be turned on and run with a voltage supply of 1.8V volts. A 16-Bit architecture is used. The maximum supply current of this microprocessor is 1.9V. In this CPU microprocessor, the clock frequency is 0 Hz. Data will be communicated between peripherals through 9 serial I/Os. The Direct Memory Access (DMA) process is programmed with 51 channels.
ATSAMA5D225C-D1M-CUR Features
ARM? Cortex?-A5 Core
16-Bit Structure
ATSAMA5D225C-D1M-CUR Applications
There are a lot of Microchip Technology ATSAMA5D225C-D1M-CUR Microprocessor applications.
- Hand-held metering systems
- Agriculture, transportation field
- Computed Tomography (CT scan)
- 8. Navigation control field
- Calculator
- DDC control
- Data acquisition and control
- Safety field
- Paper shredders
- Network application field
