ATSAMA5D22C-CUR
| Parameters | |
|---|---|
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI |
| USB | USB 2.0 + HSIC |
| Additional Interfaces | I2C, SMC, SPI, UART, USART, QSPI |
| Co-Processors/DSP | Multimedia; NEON™ MPE |
| Security Features | ARM TZ, Boot Security, Cryptography, RTIC, Secure Fusebox, Secure JTAG, Secure Memory, Secure RTC |
| Display & Interface Controllers | Keyboard, LCD, Touchscreen |
| Height Seated (Max) | 1.2mm |
| Length | 11mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Package / Case | 196-TFBGA, CSBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2017 |
| Series | SAMA5D2 |
| JESD-609 Code | e2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 196 |
| Terminal Finish | Tin/Silver/Copper/Nickel (Sn/Ag/Cu/Ni) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.75mm |
| Base Part Number | ATSAMA5D22 |
| JESD-30 Code | S-PBGA-B196 |
| Supply Voltage-Max (Vsup) | 1.32V |
| Supply Voltage-Min (Vsup) | 1.1V |
| Speed | 500MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A5 |
| Clock Frequency | 24MHz |
| Address Bus Width | 26 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 16 |
ATSAMA5D22C-CUR Overview
The embedded microprocessor has been packed in 196-TFBGA, CSBGA for convenient overseas shipping. Advanced packaging method Cut Tape (CT) is used to provide high reliability. 1 Core 32-Bit cores/Bus width are present in the CPU. Extended operating temperature around -40°C~85°C TA. From the SAMA5D2 series. A ARM? Cortex?-A5 processor powers this CPU. LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI RAM controllers are used by this CPU. With its I2C, SMC, SPI, UART, USART, QSPI interfaces, this microprocessor will be able to serve you better. The CPU runs I/O at 3.3V. In terms of uPs and uCs as well as peripheral ICs, this is a MICROPROCESSOR, RISC. Use ATSAMA5D22 when searching for variants of the embedded microprocessor. The total number of terminations is 196. Using a 1.2V voltage supply, you should be able to operate the cpu microprocessor. 1.32V is its maximum supply current. With a 16 width external data bus, this CPU has a wide external data bus. CPU microprocessors with clock frequencies of 24MHz operate.
ATSAMA5D22C-CUR Features
ARM? Cortex?-A5 Core
ATSAMA5D22C-CUR Applications
There are a lot of Microchip Technology ATSAMA5D22C-CUR Microprocessor applications.
- Binding machines
- Projectors
- Copiers
- Leakage current tester
- Broadband technology, video and voice processing
- Smoke alarms
- Data acquisition and control
- Process control devices
- Oil and gas
- Process control devices
