ATSAMA5D26A-CUR
| Parameters | |
|---|---|
| Package / Case | 289-LFBGA |
| Surface Mount | YES |
| Number of Pins | 289 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | SAMA5D2 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 289 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 500MHz |
| Base Part Number | ATSAMA5D26 |
| Supply Voltage-Max (Vsup) | 1.32V |
| Supply Voltage-Min (Vsup) | 1.1V |
| Interface | EBI/EMI, Ethernet, I2C, IrDA, LIN, MMC, SD, SDIO, SPI, UART, USART, USB |
| Oscillator Type | Internal |
| Number of I/O | 128 |
| Memory Type | External Program Memory |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A5 |
| Peripherals | DMA, LCD, POR, PWM, WDT |
| Address Bus Width | 26 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI |
| USB | USB 2.0 + HSIC |
| Additional Interfaces | I2C, SMC, SPI, UART, USART, QSPI |
| Co-Processors/DSP | Multimedia; NEON™ MPE |
| Security Features | ARM TZ, Boot Security, Cryptography, RTIC, Secure Fusebox, Secure JTAG, Secure Memory, Secure RTC |
| Display & Interface Controllers | Keyboard, LCD, Touchscreen |
| Height Seated (Max) | 1.4mm |
| Length | 14mm |
| RoHS Status | ROHS3 Compliant |
ATSAMA5D26A-CUR Overview
The microprocessor is conveniently packaged in 289-LFBGA, making it easy to ship internationally. Using advanced packaging techniques Tape & Reel (TR), high reliability is ensured. Cores/Bus width is 1 Core 32-Bit. The operating temperature around -40°C~85°C TA should be understood. From the SAMA5D2 series. A ARM? Cortex?-A5 processor is present in this CPU. A CPU with this architecture uses LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI RAM controllers. This microprocessor is equipped with an interface of I2C, SMC, SPI, UART, USART, QSPI. 3.3V is the CPU's I/O address. I would rate this as a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. Search ATSAMA5D26 for variants of the embedded microprocessor. As a whole, there are 289 terminations. With a 1.2V voltage supply, the part should be turned on and run. 500MHz Hz is the frequency at which the CPU operates. For information about 289 pins, please refer to the datasheet. A maximum supply current of 1.32V can be achieved by the microprocessor. With a 32 width external data bus, this CPU has a wide external data bus. Data is transferred through 128 I/O ports by CPU programs. DMA, LCD, POR, PWM, WDT peripheral CPU microprocessors are connected to the CPU.
ATSAMA5D26A-CUR Features
ARM? Cortex?-A5 Core
128 I/Os
DMA, LCD, POR, PWM, WDT Peripherals
ATSAMA5D26A-CUR Applications
There are a lot of Microchip Technology ATSAMA5D26A-CUR Microprocessor applications.
- Teletext terminals
- Automobile
- Microwave ovens
- Equipment control
- Calculators
- Wastewater treatment
- Air fryers
- Entertainment products
- Microwave ovens
- Routers
