ATSAMA5D27C-CNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 289-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2017 |
| Series | SAMA5D2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 289 |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Base Part Number | ATSAMA5D27 |
| JESD-30 Code | S-PBGA-B289 |
| Supply Voltage-Max (Vsup) | 1.32V |
| Supply Voltage-Min (Vsup) | 1.1V |
| Speed | 500MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A5 |
| Clock Frequency | 24MHz |
| Address Bus Width | 26 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI |
| USB | USB 2.0 + HSIC |
| Additional Interfaces | I2C, SMC, SPI, UART, USART, QSPI |
| Co-Processors/DSP | Multimedia; NEON™ MPE |
| Security Features | ARM TZ, Boot Security, Cryptography, RTIC, Secure Fusebox, Secure JTAG, Secure Memory, Secure RTC |
| Display & Interface Controllers | Keyboard, LCD, Touchscreen |
| Height Seated (Max) | 1.4mm |
| Length | 14mm |
| RoHS Status | ROHS3 Compliant |
ATSAMA5D27C-CNR Overview
Shipping overseas is convenient thanks to the embedded microprocessor's packaging in 289-LFBGA. The packaging method Cut Tape (CT) provides high reliability. There are 1 Core 32-Bit cores per bus width on the CPU. Recognize operating temperatures around -40°C~105°C TA. It comes from the SAMA5D2 series. ARM? Cortex?-A5 is the processor core of this CPU. LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI RAM controllers are used by this CPU. The microprocessor features interfaces I2C, SMC, SPI, UART, USART, QSPI for better service. 3.3V is the I/O speed of this CPU. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR, RISC. Use ATSAMA5D27 when searching for variants of the embedded microprocessor. A total of 289 terminations have been recorded. When the voltage supply is 1.2V, the cpu microprocessor should be powered on and run. A maximum supply current of 1.32V is available. There is a wide width of 32 on the external data bus of this CPU. In this CPU microprocessor, the clock frequency is 0 Hz.
ATSAMA5D27C-CNR Features
ARM? Cortex?-A5 Core
ATSAMA5D27C-CNR Applications
There are a lot of Microchip Technology ATSAMA5D27C-CNR Microprocessor applications.
- Washing machine
- Christmas lights
- Industrial instrumentation devices
- Smoke alarms
- Routers
- Blood pressure monitors
- Hearing aids
- DCS control intelligent sensor
- Hand-held metering systems
- Sonography (Ultrasound imaging)
