ATSAMA5D27C-D1G-CUR
| Parameters | |
|---|---|
| Base Part Number | ATSAMA5D27 |
| JESD-30 Code | S-PBGA-B289 |
| Supply Voltage-Max (Vsup) | 1.9V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Speed | 500MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A5 |
| Clock Frequency | 24MHz |
| Bit Size | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| RAM (words) | 65536 |
| Voltage - I/O | 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI |
| USB | USB 2.0 + HSIC |
| Additional Interfaces | I2C, SMC, SPI, UART, USART, QSPI |
| Number of Serial I/Os | 9 |
| Co-Processors/DSP | Multimedia; NEON™ MPE |
| On Chip Data RAM Width | 16 |
| Security Features | ARM TZ, Boot Security, Cryptography, RTIC, Secure Fusebox, Secure JTAG, Secure Memory, Secure RTC |
| Display & Interface Controllers | Keyboard, LCD, Touchscreen |
| Number of DMA Channels | 51 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Factory Lead Time | 1 Week |
| Package / Case | 289-TFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SAMA5D2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 289 |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
ATSAMA5D27C-D1G-CUR Overview
Due to its 289-TFBGA packaging, it is convenient to ship overseas. High reliability can be achieved by using the advanced packaging method Tray. There are 1 Core 32-Bit cores per bus width on the CPU. Recognize operating temperatures around -40°C~85°C TA. This is part of the SAMA5D2 series. The CPU is cored with a ARM? Cortex?-A5 processor. There are LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI RAM controllers on this CPU. Microprocessors with I2C, SMC, SPI, UART, USART, QSPI interfaces are designed to serve users better. 3.3V is the CPU's I/O address. uPs/uCs/Peripheral ICs are a MICROPROCESSOR, RISC. The microprocessor can be searched for with ATSAMA5D27 if you are looking for variants. In total, 289 terminations have been made. In the case of a 1.8V voltage supply, the embedded microprocessor should be turned on and run. In terms of architecture, it is a 16-Bit system. Supply current is maximum at 1.9V. A clock frequency of 24MHz is used by the CPU microprocessor. Data is received between peripherals by 9 serial I/Os. DMA (Direct Memory Access) is programmed using 51 channels.
ATSAMA5D27C-D1G-CUR Features
ARM? Cortex?-A5 Core
16-Bit Structure
ATSAMA5D27C-D1G-CUR Applications
There are a lot of Microchip Technology ATSAMA5D27C-D1G-CUR Microprocessor applications.
- Fax machines
- Industrial instrumentation devices
- ECG machine
- Smoke alarms
- Television
- Guidance-GPS
- Dryers
- Fabric
- Magnetic resonance imaging (MRI)
- Virtual reality VR robots
