ATSAMA5D27C-D5M-CUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 289-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SAMA5D2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 289 |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Base Part Number | ATSAMA5D27 |
| JESD-30 Code | S-PBGA-B289 |
| Supply Voltage-Max (Vsup) | 1.9V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Speed | 500MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A5 |
| Clock Frequency | 24MHz |
| Bit Size | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| RAM (words) | 65536 |
| Voltage - I/O | 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI |
| USB | USB 2.0 + HSIC |
| Additional Interfaces | I2C, SMC, SPI, UART, USART, QSPI |
| Number of Serial I/Os | 9 |
| Co-Processors/DSP | Multimedia; NEON™ MPE |
| On Chip Data RAM Width | 16 |
| Security Features | ARM TZ, Boot Security, Cryptography, RTIC, Secure Fusebox, Secure JTAG, Secure Memory, Secure RTC |
| Display & Interface Controllers | Keyboard, LCD, Touchscreen |
| Number of DMA Channels | 51 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| RoHS Status | Non-RoHS Compliant |
ATSAMA5D27C-D5M-CUR Overview
Packed in 289-LFBGA, the microprocessor is convenient for shipping overseas. High reliability is achieved with advanced packaging method Tray. There are 1 Core 32-Bit cores/bus width on the CPU. Obtain a basic understanding of operating temperature around 0°C. A SAMA5D2 series item. With a core count of ARM? Cortex?-A5, this CPU is multicore. A total of LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI RAM controllers are used by this CPU. The microprocessor features interfaces I2C, SMC, SPI, UART, USART, QSPI for better service. The CPU runs I/O at 3.3V. In terms of uPs and uCs as well as peripheral ICs, this is a MICROPROCESSOR, RISC. Search ATSAMA5D27 for variants of the embedded microprocessor. Total terminations are 289. Using a 1.8V voltage supply, the microprocessor should turn on and run. It has a 16-Bit architecture. A maximum supply current of 1.9V is available. There is 24MHz clock frequency for the microprocessor. 9 serial I/O is set up to communicate data between peripherals. To program DMA (Direct Memory Access), 51 channels are used.
ATSAMA5D27C-D5M-CUR Features
ARM? Cortex?-A5 Core
16-Bit Structure
ATSAMA5D27C-D5M-CUR Applications
There are a lot of Microchip Technology ATSAMA5D27C-D5M-CUR Microprocessor applications.
- Consumer electronics products
- Information appliances (networking of household appliances)
- Process control devices
- Industrial instrumentation devices
- Walkie talkies
- Television
- Telephone sets
- Coffee machines
- Copiers
- Tape drives
