ATSAMA5D28A-CN
| Parameters | |
|---|---|
| Package / Case | 289-LFBGA |
| Surface Mount | YES |
| Number of Pins | 289 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2016 |
| Series | SAMA5D2 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 289 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 500MHz |
| Base Part Number | ATSAMA5D28 |
| Operating Supply Voltage | 1.2V |
| Supply Voltage-Max (Vsup) | 1.32V |
| Interface | CAN, EBI/EMI, Ethernet, I2C, I2S, IrDA, LIN, MMC, SD, SDIO, SPI, UART, USART, USB |
| Memory Size | 160kB |
| Oscillator Type | Internal |
| Number of I/O | 128 |
| RAM Size | 128kB |
| Memory Type | External Program Memory, ROM |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A5 |
| Peripherals | DMA, LCD, POR, PWM, WDT |
| Data Bus Width | 32b |
| Number of Timers/Counters | 6 |
| Address Bus Width | 26 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI |
| USB | USB 2.0 + HSIC |
| Additional Interfaces | I2C, SMC, SPI, UART, USART, QSPI |
| Co-Processors/DSP | Multimedia; NEON™ MPE |
| Security Features | ARM TZ, Boot Security, Cryptography, RTIC, Secure Fusebox, Secure JTAG, Secure Memory, Secure RTC |
| Display & Interface Controllers | Keyboard, LCD, Touchscreen |
| Height Seated (Max) | 1.4mm |
| Length | 14mm |
| RoHS Status | ROHS3 Compliant |
ATSAMA5D28A-CN Overview
Packed in 289-LFBGA, the microprocessor is convenient for shipping overseas. A high level of reliability is provided by using an advanced packaging method Tray. The CPU has 1 Core 32-Bit cores/Bus width. Recognize operating temperatures around -40°C~105°C TA. The cpu microprocessor belongs to the SAMA5D2 series. A ARM? Cortex?-A5 processor powers this CPU. A total of LPDDR1, LPDDR2, LPDDR3, DDR2, DDR3, DDR3L, QSPI RAM controllers are used by this CPU. This microprocessor is equipped with an interface of I2C, SMC, SPI, UART, USART, QSPI. 3.3V is the CPU's I/O address. I would rate this as a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. Try searching for variants of the cpu microprocessor with ATSAMA5D28. Total terminations are 289. In the case of a 1.2V voltage supply, the embedded microprocessor should be turned on and run. 500MHz is the frequency of the CPU. Detailed functions for 289 pins can be found in the datasheets. The supply voltage should not exceed 1.32V. The size of data Bus of the CPU is based on 32b-bit system. From 1.2V, the micro processor can be used. Random-Access Memory (RAM) is designed with an amount of 128kB KB. 128 I/Os are used by CPU programs to transfer data. There is 160kB memory on the CPU. An example of a 6 counter can be found here. DMA, LCD, POR, PWM, WDT peripheral CPU microprocessors are connected to the CPU.
ATSAMA5D28A-CN Features
ARM? Cortex?-A5 Core
32b-Bit Data Bus Width
128kB RAM
128 I/Os
DMA, LCD, POR, PWM, WDT Peripherals
ATSAMA5D28A-CN Applications
There are a lot of Microchip Technology ATSAMA5D28A-CN Microprocessor applications.
- Smart highways (navigation, traffic control, information monitoring and car service)
- Kindle
- Instrument control
- Smart instruments
- Dryers
- Agriculture, transportation field
- Computer/laptop
- Network communication, mobile communication field
- Robots
- Digital TVs
