ATSAMA5D31A-CFU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 324-TFBGA |
| Surface Mount | YES |
| Number of Pins | 324 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2014 |
| Series | SAMA5D3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 324 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 536MHz |
| Base Part Number | ATSAMA5D31 |
| Operating Supply Voltage | 1.2V |
| Interface | 2-Wire, CAN, EBI/EMI, Ethernet, I2C, SPI, UART, USART, USB |
| Max Supply Voltage | 1.32V |
| Min Supply Voltage | 1.08V |
| Memory Size | 160kB |
| Oscillator Type | Internal |
| Number of I/O | 160 |
| RAM Size | 128kB |
| Memory Type | L1 Cache, ROM, SRAM |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A5 |
| Peripherals | DMA, LCD, POR, PWM, WDT |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 2 |
| Address Bus Width | 26 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.2V 1.8V 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR, LPDDR2, DDR2 |
| USB | USB 2.0 (3) |
| Additional Interfaces | I2C, MMC/SD/SDIO, SPI, SSC, UART, USART |
| Number of Cores | 1 |
| Security Features | AES, SHA, TDES, TRNG |
| Display & Interface Controllers | LCD, Touchscreen |
| RoHS Status | ROHS3 Compliant |
ATSAMA5D31A-CFU Overview
Shipping overseas is convenient thanks to the embedded microprocessor's packaging in 324-TFBGA. High reliability is provided by the advanced packaging method Tray. The CPU has 1 Core 32-Bit cores/Bus width. Obtain a basic understanding of operating temperature around 0°C. SAMA5D3 is its series number. A ARM? Cortex?-A5 processor powers this CPU. LPDDR, LPDDR2, DDR2 RAM controllers are used by this CPU. A I2C, MMC/SD/SDIO, SPI, SSC, UART, USART interface has been added to this microprocessor in order to serve the user better. The CPU runs I/O at 1.2V 1.8V 3.3V. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR, RISC. You can search for variants of a microprocessor with ATSAMA5D31. As a whole, there are 324 terminations. With a 1.2V voltage supply, the part should be turned on and run. There is a 32-Bit architecture in it. At 536MHz, the CPU operates. To learn about the functions of the pins 324 please refer to their datasheets. Typical Microprocessors cpu microprocessor. In order to transfer data, there is a bandwidth of 32b. A 1-core CPU is used here. From 1.2V, the micro processor can be used. In general, RAM (Random-Access Memory) is designed with a 128kB of 0MB. A voltage higher than 1.32V shouldn't be used in a normal situation. Micro processors should be supplied with 1.08V as their lowest voltage. The CPU programs, transfers data by 160 I/Os. A CPU has memory sized 160kB. The CPU's idle time can be determined by 2 counters. The CPU is connected to DMA, LCD, POR, PWM, WDT peripheral devices.
ATSAMA5D31A-CFU Features
ARM? Cortex?-A5 Core
32-Bit Structure
32b-Bit Data Bus Width
1-Core CPU
128kB RAM
160 I/Os
DMA, LCD, POR, PWM, WDT Peripherals
ATSAMA5D31A-CFU Applications
There are a lot of Microchip Technology ATSAMA5D31A-CFU Microprocessor applications.
- X-ray
- Walkie talkies
- Fax machines
- Network communication, mobile communication field
- Temperature sensing and controlling devices
- Electromechanical control
- Equipment control
- Air fryers
- Dryers
- Paper shredders
