ATSAMA5D31A-CU
| Parameters | |
|---|---|
| Peripherals | DMA, LCD, POR, PWM, WDT |
| Bit Size | 32 |
| Watchdog Timer | Yes |
| Data Bus Width | 32b |
| Number of Timers/Counters | 2 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.2V 1.8V 3.3V |
| Number of UART Channels | 7 |
| Number of ADC Channels | 12 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR, LPDDR2, DDR2 |
| USB | USB 2.0 (3) |
| Additional Interfaces | I2C, MMC/SD/SDIO, SPI, SSC, UART, USART |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 3 |
| Security Features | AES, SHA, TDES, TRNG |
| Display & Interface Controllers | LCD, Touchscreen |
| Number of SPI Channels | 6 |
| Number of Ethernet Channels | 1 |
| Height | 1.1mm |
| Length | 15.05mm |
| Width | 15.05mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Package / Case | 324-LFBGA |
| Surface Mount | YES |
| Number of Pins | 324 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2015 |
| Series | SAMA5D3 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 324 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 536MHz |
| Base Part Number | ATSAMA5D31 |
| Operating Supply Voltage | 1.2V |
| Interface | CAN, Ethernet, LIN, SPI, UART, USB |
| Max Supply Voltage | 1.32V |
| Min Supply Voltage | 1.08V |
| Memory Size | 160kB |
| Number of I/O | 160 |
| RAM Size | 128kB |
| Memory Type | FLASH, ROM |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A5 |
ATSAMA5D31A-CU Overview
The embedded microprocessor has been packed in 324-LFBGA for convenient overseas shipping. High reliability is provided by the advanced packaging method Tray. The CPU has 1 Core 32-Bit cores/Bus width. Identify the operating temperature around -40°C~85°C TA. A SAMA5D3 series item. With a core count of ARM? Cortex?-A5, this CPU is multicore. A total of LPDDR, LPDDR2, DDR2 RAM controllers are used by this CPU. This microprocessor features interfaces I2C, MMC/SD/SDIO, SPI, SSC, UART, USART. As far as I/O is concerned, this CPU runs at 1.2V 1.8V 3.3V. uPs/uCs/Peripheral ICs are a MICROPROCESSOR, RISC. Try searching for variants of the cpu microprocessor with ATSAMA5D31. Total terminations are 324. The microprocessor should be turned on and run with a voltage supply of 1.2V volts. There are 32 bits in its architecture. 536MHz is the CPU's frequency. 324 pin functions are described in the datasheets. An example of a Microprocessors microprocessor can be found here. To transfer data, there is a bandwidth of 32b. The micro processor can function from 1.2V. The amount of RAM (Random-Access Memory) is designed 128kB. Users should not supply a microprocessor with more voltage than 1.32V under normalcircumstances. It is recommended that the lowest voltage be fed to the micro processor is 1.08V. CPU programs transfer data via 160 I/Os. Its memory size is 160kB. To determine the CPU's efficiency, 2 counters are used. This embedded microprocessor has 7 UART (Universal Asynchro7us Receiver/Transmitter) channelsA CPU is connected to DMA, LCD, POR, PWM, WDT peripheral devices.
ATSAMA5D31A-CU Features
ARM? Cortex?-A5 Core
32-Bit Structure
32b-Bit Data Bus Width
128kB RAM
160 I/Os
DMA, LCD, POR, PWM, WDT Peripherals
ATSAMA5D31A-CU Applications
There are a lot of Microchip Technology ATSAMA5D31A-CU Microprocessor applications.
- Blood pressure monitors
- Toasters
- Fire alarms
- Keyboards
- Industrial control field
- Multi-meter
- Virtual reality VR robots
- Digital cameras
- Washing machine
- Microwave ovens
