ATSAMC21E15A-AUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | SAM C21 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ATSAMC21 |
| JESD-30 Code | S-PQFP-G32 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Oscillator Type | Internal |
| Number of I/O | 26 |
| Speed | 48MHz |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, POR, WDT |
| Clock Frequency | 48MHz |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | CANbus, I2C, LINbus, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 10x12b, 1x16b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | YES |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
ATSAMC21E15A-AUT Overview
It is available in the 32-TQFP package for the benefit of saving space. This is mounted using the Surface Mount method. This item can be found in package Tape & Reel (TR). A ARM? Cortex?-M0+ core processor powers the device. Working at -40°C~85°C TA temperature is recommended. It has a type of program memory of FLASH. There are 26 I/Os on it. To find comparable components, use the ATSAMC21 base part number. The terminals of this device are located at QUAD. This circuit consists of 32 terminationals. This electrical component is part of the SAM C21 series. It is possible to achieve high efficiency with a 5V supply voltage. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. During the operation of the device, the clock runs at a frequency of 48MHz. Normal operation requires a supply voltage (Vsup) above 2.7V. Using an oscillator type Internal, it operates.
ATSAMC21E15A-AUT Features
32-TQFP package
Mounting type of Surface Mount
ATSAMC21E15A-AUT Applications
There are a lot of Microchip Technology ATSAMC21E15A-AUT Microcontroller applications.
- DCS control intelligent sensor
- Microwave ovens
- Data acquisition and control
- Christmas lights
- Coffee machines
- Washing machine
- Blood pressure monitors
- Leakage current tester
- Microwave ovens
- Instrument control
