ATSAMC21E15A-MUT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | SAM C21 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ATSAMC21 |
| JESD-30 Code | S-XQCC-N32 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Oscillator Type | Internal |
| Number of I/O | 26 |
| Speed | 48MHz |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, POR, WDT |
| Clock Frequency | 48MHz |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | CANbus, I2C, LINbus, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 10x12b, 1x16b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | YES |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATSAMC21E15A-MUT Overview
There is an option to purchase it in the 32-VFQFN Exposed Pad package, which saves space. This is mounted using the Surface Mount method. In the package Tape & Reel (TR), it is included. There is a ARM? Cortex?-M0+ as core processor in this device. The temperature should be kept at -40°C~85°C TA while working. In terms of its program memory type, it is FLASH. A total of 26 I/Os are present. To find comparable components, use the ATSAMC21 base part number. QUAD is the position of its terminals on the board. 32 terminations are present in it. This electrical component is part of the SAM C21 series. Because the supply voltage is 5V, high efficiency can be achieved. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. There is a clock running in the device at a frequency of 48MHz. In order to maintain normal operation, Vsup must be above 2.7V. There is an oscillator type Internal used in this circuit.
ATSAMC21E15A-MUT Features
32-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATSAMC21E15A-MUT Applications
There are a lot of Microchip Technology ATSAMC21E15A-MUT Microcontroller applications.
- Vacuum cleaners
- Walkie talkies
- Graphic terminals
- Digital set-top boxes
- Automatic staplers
- Oscilloscopes
- Calculator
- Fax machines
- Torpedo guidance
- DVD\DV\MP3 players
